Hôtellerie Multilogement Entreprise Résidentiel Expertise Contact

Expert WiFi guides for Quebec businesses

Practical tutorials based on our WiFi installations in Montreal and Quebec since 2009.

What a WiFi expert checks before installing a business network

A business WiFi network that works well depends less on the brand of access points than on what was measured and decided before installation. These guides summarize the method we have used since 2009 in offices, hotels, clinics and buildings across Quebec. Here is what a WiFi expert always checks, and what you can ask of any provider.

1. An on-site survey

Concrete walls, elevator shafts, tinted glass and neighbouring networks change how the signal travels. A site survey measures real coverage room by room and finds sources of interference. Without it, the number and placement of access points are a guess, and dead zones show up after the invoice.

2. Capacity, not just coverage

Signal everywhere is not enough: a meeting room with twenty people on video calls, or a warehouse full of barcode scanners, needs capacity. The expert counts devices per area and their uses (video, voice, business apps), then sets channels and power accordingly. That is the difference between a network that "has bars" and one that holds up at 10 a.m. on a Monday.

3. Segmentation and security

Staff, guests, printers, cameras and connected devices should never share one network. VLANs separate uses, a captive portal isolates guests, and RADIUS (802.1X) authentication lets each employee sign in with their own Microsoft 365 account instead of a shared password. WPA3 encryption is enabled as soon as the device fleet supports it.

4. Cabling and power

Each access point needs a network cable and, ideally, PoE power from the switch. An expert checks the existing cabling, switch capacity and room in the network closet before promising a timeline. Wireless mesh helps in a pinch, but it does not replace a cable where one can be run.

5. Management and follow-up after go-live

A business network needs monitoring: offline access points, firmware updates, a saturated channel. We deploy Ubiquiti equipment managed from a central controller, so we are alerted to an outage before your staff and can fix it remotely. A documented technical plan is handed over at the end, so your IT team never depends on us to understand its own network.

How to choose a business WiFi expert in Quebec

The full checklist is in our guide 12 questions to ask your WiFi installer. For an office project, see our business and office WiFi page and our certifications and method. Questions? Call 1-877-622-3658; the needs assessment is free.

Business WiFi FAQ

What does a WiFi expert do that an installer doesn't?

They measure before they quote. A WiFi expert performs a site survey, sizes the network for the number of devices and their uses, separates staff, guest and device networks, then documents and monitors the installation. A basic installer mounts the access points listed on the quote without guaranteeing the result in your space.

How many access points does an office need?

It depends on walls, floor area and above all how many devices connect at once. As a rough guide, a small business with 1 to 30 employees usually needs 2 to 4 access points, and one with 30 to 100 employees 5 to 12. Only a site survey can set the right number and placement.

Should guest WiFi be separate from the staff network?

Always. A guest should never be able to reach your servers, printers or staff computers. We create an isolated guest network, ideally behind a captive portal, with limited bandwidth. If you collect guest information such as email addresses, Quebec's Law 25 governs what you can do with it.

How do I verify a WiFi expert's certifications?

Ask for the exact certification name, the holder and the date earned, then check it with the issuing organization. Vendor certifications such as Ubiquiti's UEWA prove mastery of specific equipment; CWNP certifications such as CWS are vendor-neutral and cover wireless network design.